Display Cpu - H3C S7500 Series Command Manual

Command Manual – System Maintenance and Debugging
H3C S7500 Series Ethernet Switches
Parameters
None
Description
Use the display boot-loader command to display the APP file that is adopted when the
switch boots this time and next time.
Examples
# Display the APP that will be adopted when the switch reboots.
<H3C> display boot-loader
The primary app to boot of board 0 at the next time is: flash:/ccc.app
The backup app to boot of board 0 at the next time is: flash:/ddd.app
The app to boot of board 0 at this time is: flash:/ccc.app
Table 3-1 Description on the fields of the display boot-loader command
The primary app to boot of board 0 at the
next time
The backup app to boot of board 0 at the
next time
The app to boot of board 0 at this time

3.1.6 display cpu

Syntax
display cpu [ slot slot-number ]
View
Any view
Parameters
slot slot-number: Specifies a slot. The CPU status of the card on the slot is to be
displayed.
Description
Use the display cpu command to display the CPU usage of a specified switch.
Examples
# Display the CPU usage of the card on slot 0 of the switch.
Field
3-4
Chapter 3 Device Management Commands
Description
Primary boot file used by the device for
reboot next time
Backup boot file used by the device for
reboot next time
Boot file used by the device for boot this
time