Qe Monitor; Qe Monitor Errpkt - H3C S7500 Series Command Manual

Command Manual – System Maintenance and Debugging
H3C S7500 Series Ethernet Switches

3.1.16 qe monitor

Syntax
qe monitor { enable | disable }
View
System view
Parameters
enable: Enables queue traffic monitoring.
disable: Disables queue traffic monitoring.
Description
Use the qe monitor command to enable/disable queue traffic monitoring.
Queue traffic monitoring is disabled by default.
With queue traffic monitoring enabled on a switch, the switch monitors the queue traffic
and relieves blocks in the output queue of its interfaces.
The criterion used to distinguish a block is that the queue is full and the traffic of the
corresponding interface is less than the specified threshold.
Refer to the qe monitor overflow-threshold command for information about how to
set a threshold.
Examples
# Enable queue traffic monitoring.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] qe monitor enable

3.1.17 qe monitor errpkt

Syntax
qe monitor errpkt { all | none | runt }
View
Ethernet port view
Parameters
all: Specifies to detect all error packets on current interface.
none: Specifies not to detect error packets on current interface.
Chapter 3 Device Management Commands
3-12