Functions 1; E-Mail - Mitsubishi Electric AE-200A Instruction Book

5. Functions 1

5-1. E-Mail

E-mail settings must be configured properly to use the error notification e-mail function or the e-mail
communication function. Error notification e-mail function is the function to send the error information to the
specified e-mail addresses. E-mail communication function is the function to send the units' maintenance data to
the specified e-mail addresses of the PCs to which Maintenance Tool is installed.
Click [Functions 1] in the menu bar, and then click [E-Mail] to access the e-mail settings screen. Make the various
e-mail settings, and then click [Save Settings].
Note: The E-mail settings may not be accessible if logged in as a building manager.
Mail Server Information
Set the mail server/DNS
server information.
Mail Communication
Setting
Set the e-mail addresses
of the PCs that will receive
maintenance data through
e-mail communication
function.
Refresh
Click to import the settings
from AE-200/AE-50/EW-50.
5-1-1. E-Mail Settings of AE-200/AE-50/EW-50
Enter the AE-200/AE-50/EW-50's e-mail information provided by the Internet Service Provider (ISP) or the
system administrator. The items required to be set vary, depending on the functions to be used. Refer to the table
below to determine which items need to be set.
Note: A contract with the ISP is required to send e-mail via an ISP.
Table 5-1 Items required to be set (E-Mail Settings of AE-200/AE-50/EW-50)
Item
E-Mail Address
User ID
Password
Interval of checking incoming mails
WT07138X02
Error notification e-mail function
Without SMTP With SMTP
authentication authentication
V V
- V
- V
- -
30
E-Mail Settings of
AE-200/AE-50/EW-50
Error Mail Settings
Enter the e-mail information
for error notification e-mail
function.
Save Settings
Click to save the changes
made.
E-mail communication function
Without SMTP With SMTP
authentication authentication
V
V
V
V
(V) Required to be set, (-) Not required to be set
V
V
V
V