Mitsubishi Electric AE-200A Instruction Book page 23

4-2-6. Display Format
Follow the instructions below to set the items in the [Display Format] section.
(1) In the [Unit of Temperature] section, select [ºC] or [ºF].
(2) In the [Pressure unit of measure] section, select [MPa], [PSI], or [kgf/cm
(3) In the [Date Format] section, select the desired display format for year, month, and date.
(4) In the [Time Format] section, select the desired display of time format.
(5) In the [Group Names on Overview Monitor] section, select [ON] to display the group names under the icons
on the Condition List screen. Select [OFF] not to display the group names.
Note: Only the first 8 characters will be visible under the icons. To display all characters, move the cursor to the icon.
Icons with group names
(6) In the [Filter Sign Display] section, select [ON] to display the filter sign, and select [OFF] not to.
When the [Filter Sign Display] is set to [OFF], the filter sign will not appear on the Condition List screen even
when the indoor unit detects a filter cleaning signal.
If the filter is regularly cleaned and the sign display is unnecessary, set it to [OFF].
(7) In the [Room temp. display (except for group list)] section, select the desired temperature display option to
be used on the Block display of the Condition List screen.
Select [Always show] to display the temperature at all times, [Show during operation] to display the
temperature only during operation, and [Hide] not to display the temperature.
WT07138X02
2 ].
Icons without group names
23