Mitsubishi Electric AE-200A Instruction Book page 33

5-1-5. E-mail format
Error notification e-mail will be sent in the format shown below.
Mail subject The mail subject entered in section 5-1-3 will appear.
From The AE-200/AE-50/EW-50 unit name and unit ID entered in section 4-2-1 will appear.
Date Error occurrence date and time will appear in the format entered in section 4-2-6.
- When an error occurs on air conditioning units or general equipment, the M-NET address of the unit
in error will appear.
- When an error occurs on general equipment connected to PLC Software for General Equipment, PLC
number* (1 to 20) and connection number of general equipment (1 to 32) will appear.
- When a communication error occurs on PLC Software for General Equipment, PLC number* (1 to 20)
will appear.
Error unit
* PLC number indicates the row number on the [PLC Connection] screen. (Refer to section 5-1-3 (4).)
Note: When an error occurs on the general equipment connected via DIDO controller, M-NET address of
Error code (4-digit) will appear.
- When an error occurs on air conditioning units, refer to the service manual of the unit for the error
codes.
Error code
- When an error occurs on general equipment, "0091" (General equipment error) will appear.
- When a communication error occurs on PLC Software for General Equipment, "0003" (LAN
communication error to PLC) or "0007" (PLC program stopped) will appear.
Error status "Occurrence" (The error is occurring) or "Recovery" (The error has been resolved) will
Status
appear.
WT07138X02
From:Mitsubishi Building(000001)
Date:01/06/2014 16:32:12
Error unit:065
Error code:1302
Status:Occurrence
the DIDO controller will appear. (The recipients will know that an error has occurred on one of the
general equipment that is connected to the DIDO controller.)
33