Blocks - Mitsubishi Electric AE-200A Instruction Book

4-5. Blocks

By making block settings, multiple groups in a given block can be collectively monitored or operated on the
Web browser. Click [Initial Settings] in the menu bar, and then click [Blocks] to access the block settings screen.
Register the groups to each block, and then click [Save Settings].
Note: Some settings may not be accessible if logged in as a building manager.
Note: The groups of units connected to the AE-200, AE-50, and EW-50, as well as the groups of units connected to different
AE-50/EW-50 controllers, cannot be registered to the same block.
Block Name
Refresh
Click to import the settings
from AE-200/AE-50/EW-50.
(1) Enter the block name in the [Block Name] field to be displayed on the Web browser in 20 characters or less.
Note: The following characters cannot be used in the [Block Name] field: <, >, &, ", or '
(2) Click the [Group registration] field next to the target block. The [Select
Groups] screen will appear.
Select the group numbers to be registered. (To show the group name,
move the cursor to the group number.)
The selected group numbers will appear with a yellow-green
background.
Click again to deselect. The deselected group numbers will appear
with a light-gray background.
Note: HWHP (CAHV, CRHV) unit groups cannot be registered to a block.
WT07138X02
29
Group registration
Save Settings
Click to save the changes
made.