Mitsubishi Electric AE-200A Instruction Book page 12

Encrypting the communication data and logging in to the Web browser
(HTTPS connection)
AE-200/AE-50/EW-50 can encrypt communication data using HTTPS (SSL).
When connecting the AE-200/AE-50/EW-50 to the LAN that is accessible to the general public, it is
recommended that the following settings be made so that the units are monitored and controlled on the
encrypted web page.
Note: Depending on the operating system or the Java version, HTTPS encrypted communication may not be enabled properly.
If this happens, use an HTTP connection as explained in the previous page.
(1) Prefix the web address with [https], enter the rest of the address, and
press the [Enter] key.
https://[IP address of each AE-200, AE-50, or EW-50]/init/
administrator.html
Note: If the IP address of the AE-200/AE-50/EW-50 is [192.168.1.1], the web page
address is [https: //192.168.1.1/init/administrator.html].
The encrypted data communication will begin, and the Login screen
will appear.
When the first time the Web browser is accessed, a security certificate
error page appears instead of the Login screen. Go to step (2) below.
(2) Enter the following web page address in the address field of the Web browser, and press the [Enter] key:
http://[IP address of each AE-200, AE-50, or EW-50]/cacert.cer
(3) A notification bar or a window to confirm about file download will
appear.
Click [Open].
(4) A certificate dialog will appear.
Click [Install Certificate...].
WT07138X02
12