Initial Settings - Mitsubishi Electric AE-200A Instruction Book

4. Initial Settings

This chapter explains how to set the initial settings on the Web Browser for Initial Settings.
Note: When one or more AE-50/EW-50 controllers are connected, initial settings must be made on each AE-50/EW-50's Web
browser. However, only Date and Time settings (section 4-1) and Basic System settings (section 4-2) must be made on
the AE-200 Web browser.
Important
If the system is connected to a TG-2000A, make or change all settings from the TG-2000A so that the data in the
TG-2000A and AE-200 will match.
Any control (such as interlock control or Peak Cut control) between the outdoor and indoor units connected to the AE-200,
AE-50, and EW-50, as well as between the units connected to different AE-50/EW-50 controllers, cannot be performed.
WT07138X02
14