Download  Print this page

Setting The Operating Environment; Setting The Ip Address Of The Pc - Mitsubishi Electric AE-200A Instruction Book

Air conditioning control system centralized controller, web browser for initial settings.
Hide thumbs


2. Setting the Operating Environment

This chapter explains how to make PC settings and Web browser settings to monitor and operate the air
conditioning units.

2-1. Setting the IP Address of the PC

Follow the instructions below to set the PC's IP address for the Web browser to recognize the
AE-200/AE-50/EW-50 unit.
The PC's IP address must have the same network address as the AE-200/AE-50/EW-50's IP address.
(i.e., AE-200's IP address: [], PC's IP address: [])
When connecting an AE-200/AE-50/EW-50 to an existing LAN, consult the system administrator to decide the IP
Note: When using an AE-200/AE-50/EW-50-dedicated LAN, it is recommended that the AE-200 unit and the EW-50 unit (only
when used alone) be assigned an IP address between the range [] and [], the AE-50/EW-50 unit
be assigned an IP address between the range [] and [], and that the PC connected to the
AE-200/AE-50/EW-50 be assigned an IP address between the range [] and [].
(1) Click [Control Panel] in the Start menu.
(2) Click [Network and Sharing Center]>[Local Area Setting].
In the [Local Area Connection Status] window, click [Properties].
(3) Click [Internet Protocol Version 4 (TCP/IPv4)] to select it, and click


Table of Contents

   Related Manuals for Mitsubishi Electric AE-200A

This manual is also suitable for:

Ae-50aEw-50aAe-200eAe-50eEw-50eEb-50gu-a ... Show all

Comments to this Manuals

Symbols: 0
Latest comments: