X100-X103 Drive-Cliq Interfaces - Siemens SINAMICS Equipment Manual

Control Units
3.2 Control Unit CU320-2 DP (PROFIBUS)
Figure 3-7 Mounting a PC board connector (Phoenix Contact) in the measuring socket
3.2.2.2

X100-X103 DRIVE-CLiQ interfaces

Table 3-16
Connector
type
The blanking covers for the DRIVE-CLiQ interfaces are included in the scope of delivery.
Blanking covers (50 x) Article No.: 6SL3066-4CA00-0AA0
30
X100-X103 DRIVE-CLiQ interfaces
Pin Signal name
1 TXP
2 TXN
3 RXP
4 Reserved, do not use
5 Reserved, do not use
6 RXN
7 Reserved, do not use
8 Reserved, do not use
A + (24 V)
B M (0 V)
DRIVE-CLiQ socket
Measuring socket
PCB connector
Technical data
Transmit data +
Transmit data -
Receive data +
-
-
Receive data -
-
-
Power supply
Electronics ground
Supplementary component descriptions
Manual, 06/2019