Components Of The Sinamics S120 Training Case; Interconnecting The Drive-Cliq Components - Siemens SINAMICS S120 Faq

SINAMICS S120 at Technology CPU Entry ID: 21767896
1.2

Components of the SINAMICS S120 training case

The SINAMICS S120 training case used for this document includes the
following components:
Table 1-1 Components of the SINAMICS S120 training case
Component
CU320
control unit
TB30
terminal board
SLM
smart line module
Double motor module
SMC20
sensor module
cabinet
Servo motor
Servo motor
All further components included in the SINAMICS S120 training case are
not relevant for this document and are consequently not listed at this point.
The listed MLFBs are required for a manual configuration of the drive
system in S7T Config.
1.3

Interconnecting the DRIVE-CLiQ components

To enable the use of the automatic topology detection during
commissioning the SINAMICS S120 drive system, it is required to follow a
number of rules which are briefly explained in the following:
V1.0
Setup of the SINAMICS S120 Training Case
MLFB
6SL3040-0MA00-0AA1
6SL3055-0AA00-2TA0
6SL3130-6AE15-0AA0
6SL3120-2TE13-0AA0
6SL3055-0AA00-5BA1
1FK7022-5AK71-1LG0
1FK7022-5AK71-1AG3
Edition 10/28/05
Requirements
Note
Central closed-loop control
module of the SINAMICS
S120 drive system.
Terminal expansion board
which can be plugged in the
control unit
Module for generating a non-
stabilized DC-link voltage for
the supply of the motor
modules.
Special design for 230V with
deactivated feedback
function.
Inverter for connecting the
servo motors to the DC-link.
Module for evaluating
encoder signals for transfer
of the data via the DRIVE-
CLiQ connection.
1FK7 synchronous motor
with DRIVE-CLiQ interface
and absolute value encoder
(encoder resolution: 512)
1FK7 synchronous motor
with incremental encoder
(encoder resolution: 2048)
5/58