How Can I Set And Add A Smartli (Modbus-Tcp) - Huawei FusionDC1000A Commissioning Manual

Prefabricated all-in-one data center
Hide thumbs Also See for FusionDC1000A:
Table of Contents

Advertisement

FusionDC1000A Prefabricated All-in-One Data
Center
Commissioning Guide (IT Scenario)
sites, parks, PDCs, equipment rooms, and subnets. To use more management
domains, you need to install the corresponding adapter software package on the
NetEco.
Procedure
Step 1 Choose System > Service Settings > Data Center Planning from the main menu.
The Data Center Planning page is displayed.
Step 2 Add a management domain.
1.
2.
3.
4.
Step 3 Click
----End

4.7.2.7 How Can I Set and Add a SmartLi (Modbus-TCP)?

Prerequisites
One end of the straight-through cable has been connected to the FE port on the
SmartLi and the other end has been connected to the PoE port on the smart ETH
gateway.
Procedure
Step 1 Set SmartLi monitoring parameters.
1.
2.
Issue 01 (2021-04-20)
In the navigation tree, choose the upper-level node where you want to add a
management domain.
In the Domain area which is below the navigation tree, drag a management
domain icon to the required position in the view.
NO TE
You can adjust the shape of Room, Room–ShapeNode, Building–ShapeNode, Floor–
ShapeNode, Container–ShapeNode, and NetecoSite by: Holding down the Shift key
and the left mouse button and then clicking on the corresponding frame lines can
increase the small yellow dot. You can drag the small yellow dot to adjust the shape
of the managed domain icon.
To delete a domain, click the domain icon and select Delete under
In the right side of the view area, set Management Info. Set parameters as
required. The parameter marked with an asterisk (*) is mandatory.
NO TE
You can configure Management Info, Electricity Info, and Refrigeration Info for the
equipment room management domain.
Click
on the toolbar.
Repeat steps
Step 2.1
on the toolbar.
On the home screen of the SmartLi, tap System Info.
Choose System Info > Settings, enter the user name admin and password
000001, and tap
Copyright © Huawei Technologies Co., Ltd.
to
Step 2.4
until the configuration is complete.
.
4 Commissioning Core Devices
.
48

Advertisement

Table of Contents
loading

This manual is also suitable for:

V100r021c00

Table of Contents