Replacing The Sealing Strips - HAKO Scrubmaster B75R Operating Manual

5.7.2

Replacing the sealing strips

Check the sealing strip Fig. 31-G and slot strip Fig. 31-H at the squeegee
weekly for wear and intactness. If the used sealing edge of the sealing strip is
worn or damaged, turn or replace the sealing strip. Each sealing strip can be
used four times before it needs replacing.
I
Fig. 31:
1. Pull out the suction hose Fig. 30-28.
2. Loosen the star-shaped handles Fig. 30-A and remove the squeegee.
3. Press together the protective caps Fig. 31-I and pull them out.
4. Loosen the clamping band Fig. 31-B and remove it from the catch
Fig. 30-C.
5. Pull out the aluminium body Fig. 31-J from the top.
6. Remove the sealing strip Fig. 31-G and slot strip Fig. 31-H from the plastic
body Fig. 31-K.
7. Before turning or replacing the sealing strips, thoroughly clean the plastic
body!
8. Assembly is in reverse order.
05-7175-00-00.fm
J
K
B
Maintenance and Servicing
H
G
I
67