Squeegee; Clean Squeegee; Change Sealing Strips - HAKO Scrubmaster B120 Instruction Manual

Table of Contents

Advertisement

Maintenance and Care
5.8

Squeegee

1 Squeegee
2 Star-shaped knob
3 Eccentric wheel for angle adjust-
ment
4 Suction hose
5 Fastening device
6 Washers for height adjustment
1
6
Fig.11
5.8.1 Cleaning the Squeegee
Check the squeegee (Fig. 11/1) daily
and clean as necessary.
To clean it lift the squeegee out, pull off
the suction hose (Fig. 11/4), loosen the
two star-shaped knobs (Fig. 11/2) and
remove the squeegee.
2
4
5
5.8.2 Changing the Sealing Strips
Check the inner and outer sealing strips
on the squeegee (Fig. 11/1) weekly for
signs of wear. The sealing strips can be
used fourfold by turning them.
1. Lift the squeegee out.
2. Pull off the suction hose, loosen the
two star-shaped knobs and remove
the squeegee.
3. Unlock the fastening device (Fig. 11/
5) and remove the outer sealing
strip. Turn the sealing strip or install
a new one, as necessary. Change
the inner sealing strip in the same
way.
3
2
6
35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents