Table of Contents
Advertisement
EN
1.2.g - General warnings while
using the machine
- If the machine makes strange
noises, stop it immediately and
identify the cause.
- Do NOT abandon the machine
on surfaces which slope by
more than 2%.
- While using the machine, do
not knock into shelving or cup-
boards.
- It is forbidden to use the ma-
chine outdoors or on public
roads.
- If possible, use the machine in
environments where no per-
sons are present; in the pre-
sent of unauthorised persons,
warn them to move away be-
fore using the machine.
- Do not use the machine in en-
vironments with the presence
of corrosive or salty substanc-
es.
- Do not use the machine in ex-
plosive environments (ATEX).
- It is not advisable to use an
adaptor, multiple sockets, or
an extension cord.
- If the electrical cord of this ap-
pliance is damaged, it must
be replaced by an Authorized
Customer Service Centre.
EMERGENCY
In case of emergency pull the
plug out of the socket; to discon-
nect power to the circuits and to
stop all the functions of the ma-
chine.
WARNING
Unplug the machine while it is
functioning only if absolutely
necessary; do not follow this
procedure to turn off the ma-
chine as it may cause serious
damage to it.
1.2.h - General instructions for
models connected to the
fixed power supply
- Ensure that the voltage match-
es that indicated on the data
plate before turning the unit on.
- To unplug the unit from the
socket, pull the plug itself and
NOT the cable.
- Unwind the entire power cable
when using the unit.
- Solely approved extension ca-
bles can be used. These must
be adequate for the power of
the unit and must also be in
good condition.
- Do not use the unit if either the
plug or power cable is not in
good condition.
- If the power cable is damaged,
this can only be replaced by a
technical support centre that is
authorised by the manufacturer.
EN-6
:
Advertisement
Table of Contents
