Changing The In-Home Bus Configuration; Changing The Call Button Assignment; Changing Direct Door Dialling; Changing The Bsx Actuation - SSS Siedle DoorCom Analog Series Programming Instructions Manual

Changing the In-Home bus configuration

Changing the call button assign-
ment
Procedure
1 Call up the "In-home function"
menu.
2 Call up the "Call btn assignm"
submenu.
3 Select the "Call btn user [x]" func-
tion with the required user and press
OK to open it.
4 Press the programming button on
the BNG/BVNG 650-...
5 On the door station, press and
hold the light/programming button
for 4 seconds until a sustained tone
can be heard from the door loud-
speaker.
6 Press the OK button.
7 At the door station, hold down
the required call button for 4 sec-
onds until a protracted tone sounds
at the door loudspeaker.
8 Press the OK button.
9 Change other call button assign-
ments as before or press the ESC
button three times to exit the menu.

Changing direct door dialling

Procedure
1 Call up the "In-home function"
menu.
2 Press OK to open the "Dir. door
select" function.
3 Use the down-arrow key to select
the code sequence for the door
dialling.
4 Press OK to save your selection.
5 Press the programming button on
the BNG/BVNG 650-...
6 On the door station, press and
hold the light/programming button
for 4 seconds until a sustained tone
can be heard from the door loud-
speaker.
7 Press the OK button.
8 Press OK to confirm Door select.
#[xx] save.
9 Press the programming button on
the BNG/BVNG 650-...
10 Press the OK button.
11 Press the ESC button three times
to exit the menu.

Changing the BSx actuation

Procedure
1 Call up the "In-home function"
menu.
2 Press OK to open the "BSx actua-
tion" function.
3 Use the down-arrow key to select
the code sequence for the BSx
actuation.
4 Press OK to save your selection.
5 Press the programming button on
the BNG/BVNG 650-...
6 On the door station, press and
hold the light/programming button
for 4 seconds until a sustained tone
can be heard from the door loud-
speaker.
7 Press the programming button on
the required BSM/BSE 650-...
8 Press the OK button.
9 Press OK to confirm Control fct.
#[xx] save.
10 Press the ESC button three times
to exit the menu.
19