Manual Initial Configuration 3 Application; Changing The User Configuration 7 Intended Application; Important Remarks Prior; Accessories - SSS Siedle DoorCom Analog Series Programming Instructions Manual

General information
Application
DoorCom Analog, in switch panel
housing as an interface for the
Siedle In-Home bus, connects the
door intercom system to telephone
systems via the system's analogue
connection.
Intended application
• This device may only be installed
and used for operation on the Siedle
In-Home bus, as described in this
document, the associated product
information, and in the latest ver-
sions of the In-Home bus's system
manual.
• This device is designed for opera-
tion on telephone systems with an
analogue telephone connection and
can also be used for communication
via public telephone networks.
• The DCA 650-... can be operated
in the countries DE, GB, FR, IT, NL,
DK, CH and AT and must always
be connected to a standardized a/b
output.
Important remarks prior to pro-
gramming
• The DCA 650-...can be configured
manually or by using the BPS 650-...
bus programming software. Please
note that additional users (call desti-
nations) must still be created manu-
ally via the DCA-...
• These programming
instructions only relate to
manual programming of the
DoorCom Analog® DCA 650...
and supplement and are supple-
mented by the DoorCom Analog
DCA 650-... product information.
• This document supplements and
is supplemented by the product
information and programming
instructions for the DoorCom®
DCSF 600-0 switching/remote con-
trol interface accessory.

Accessories

DoorCom switching/remote control
interface DCSF 600-...:
The DCSF 600-0 is an accessory for
installation in the DCA 612-... or
DCA 650-... for extending it with
3 switching inputs and 3 switching
outputs.

Servicing

Statutory warranty conditions apply.
Customer service in the Furtwangen
factory
+49 7723 63-434
9