Performance Features - SSS Siedle DoorCom Analog Series Programming Instructions Manual

General information

Performance features

Siedle In-Home bus
• Up to 31 bus addresses
(with a bus line rectifier (1 bus
line) and a door station, max.
29 call destinations)
• Door call with call button,
code lock module or display
call module
• Switch actuators (BSM/
BSE-...) can be executed
• Up to 31 call destinations, depending on the programming and system expansion
• Max. 6 control functions can be executed via BSM/BSE 650-... by means of DTMF dialling
• Selective dialling of max. 3 door loudspeakers without supplementary installation
• Selective dialling of the door to which the last call was placed
• Configuration directly on the device via 6 buttons and alphanumeric display
• The following call possibilities can be assigned (each max. 22 digits long):
• Direct calls:
- Selective user call
- Group calls (dep. on the TC system)
- Collective calls (dep. on the TC system)
- Calls to PBX extensions, to public network or mobile phones
• Chain calls:
- In case of no answer or engaged
• System functions door release and light using the DTMF dialling method
• Doormatic function for 1 call input, with/without door call signalling
• Call rerouting to e.g. concierge
• Day/night service to alternative call destinations (depending on customer's existing TC system)
• Switching from door intercom to telephone mode
• Several DCA units possible in one intercom system/one TC system
• Adjustable call and connection time
• Call differentiation possible for door calls from various door stations (max. 2)
• Call differentiation possible from various call inputs (max. 2)
• PIN protection can be activated e.g. for programming, door release, switching functions and function activation
• Time-controlled activation/deactivation of e.g. Doormatic, call rerouting, day and night service etc. possible via
DCSF 600-... accessory and customer's time switches
• Jack for HT 811-... servicing handset
10
DoorCom Analog
Interface between the In-Home
bus and telephony
• One free bus address is needed
for each user
• Up to 1 telephone number per
user (direct call number – a chain
call number is possible as well for
users 1–3)
Interface with analogue tele-
phone connection for connec-
tion to a telephone system
• Max. 1 telephone connec-
tion to the telephone system
• Call a call number
• Call a group call number
• Configuration can be
changed (by telephone)
• Switching commands can
be triggered by telephone