SSS Siedle DoorCom Analog Series Programming Instructions Manual page 6

Brief instructions
Manual initial configuration
Procedure
Enter the call number on the
DCA... press OK to confirm
(e.g. *0123456). Max. 22-digits,
any number 0...9, *, # and F (flash
function only in the first position
before the call number).
Optionally
(Setting up a parallel call)
Put down the receivers on all indoor
stations with receivers which have
been programmed. The call button
is now assigned to all bus tele-
phones.
Note: If there are several DCA
users, repeat the last three (five for
a parallel call) configuration steps
per DCA user (and indoor station
set up in parallel).
Press the OK button.
Press the programming button on
the BNG/BVNG 650-...
6
Function button(s)
OK
Display indicator
Direct call no.
OK
*0123456
Door loudspeaker
activated
Register new
user with
Register new
user with
<ok>
<ok>
<ok>