Display Screens - SSS Siedle DoorCom Analog Series Programming Instructions Manual

Operation

Display screens

Display indicator
DCA 650-02
S. SIEDLE & SÖHNE
DCA 650-02
Making connection
DCA 650-02
Connection
DCA 650-02
Call
Register user
Please wait
No new user
possible
Registr. running
[xx] new users
Switch on prog.
mode at BNG/BVNG
Door loudspeaker
enable
Door loudspeaker
activated
Assign call button
for user
In-home-config.
aborted
16
Status
Ready for service
V 2.[xx]
Outgoing connection is being
V 2.[xx]
established
Active telephony connection
V 2.[xx]
Incoming call
V 2.[xx]
Check for free users
Not possible to register user
<ok>
User reservation in progress
Activate programming mode
Door loudspeaker must be activated
<ok>
Door loudspeaker is enabled
<ok>
Assign a call button to a user [xx]
[xx]
In-Home configuration cancelled
<ok>
Description
DCA... ready status
Outgoing call from the DCA... via
the telephony connection.
Active connection between the
DCA... and telephone.
Incoming call to the DCA... via the
telephony connection (a/b).
The DCA... checks how many users
are still free in the In-Home bus.
The DCA... could not find any free
users in the In-Home bus.
The DCA... reserves the required
number of users for itself (where
available).
To complete the reservation process,
the programming button must be
pressed on the BNG/BVNG.
To assign the call buttons to the
users, the door loudspeaker must
be activated with the light button/
programming button.
Door loudspeaker is enabled
The desired call button must be
assigned to the selected user by
pressing and holding the relevant
call button.
Programming mode was deacti-
vated while user registration was in
progress.