Changing Service Functions; Restoring The As-Delivered Status; Changing The Door Call Acceptance; Changing The Service Receiver - SSS Siedle DoorCom Analog Series Programming Instructions Manual

Configuration

Changing service functions

Restoring the as-delivered status

Procedure
1 Call up the "Service function"
menu.
2 Press OK to open the "Default
status" function.
3 Use the down-arrow key to set the
as-delivered status to "Yes".
4 Press OK to save your selection.
5 The as-delivered status has been
established.
6 Press the ESC button twice to exit
the menu.
20
Changing the door call
acceptance
Procedure
1 Call up the "Service function"
menu.
2 Press OK to open the "Call accept-
ance" function.
3 Use the down-arrow key to set
the door call acceptance to "with
DTMF" or "without DTMF".
4 Press OK to save your selection.
5 Press the ESC button twice to exit
the menu.

Changing the service receiver

Procedure
1 Call up the "Service function"
menu.
2 Press OK to open the "Service
receiver" function.
3 Use the down-arrow key to set
the door call acceptance to "on"
or "off".
4 Press OK to save your selection.
5 Press the ESC button twice to exit
the menu.