Manual Initial Configuration - SSS Siedle DoorCom Analog Series Programming Instructions Manual

Brief instructions

Manual initial configuration

To operate the DCA..., at least
one DCA user must be configured
according to the following process:
• Change the user interface lan-
guage
• Register new users manually (incl.
call button assignment, optionally
with indoor station that is called in
parallel)
Procedure
Change the user
interface language
Start screen
Press the OK button.
Press the OK button.
Use the down-arrow key to
select the required language.
Press the OK button.
Press the down-arrow key twice.
Register new user
Press the OK button.
User 1 (USER 1) is prepared for
configuration in the DCA... Use
the down-arrow key to define the
required number of additional users
(e.g. 02): 1 user= 1 call destination
in the telephone system. A max-
imum of 31 users can be selected.
Press the OK button.
The display flashes while user res-
ervation is taking place. Once the
reservation is complete, the "Switch
on prog. mode at BNG/BVNG" dis-
play appears.
If only one user is required in the
DCA... then user 1 prepared in the
DCA... (USER 1) can be configured
directly via "Change user configu-
ration".
Function button(s)
OK
OK
...
OK
OK
OK
The call buttons can be assigned/
changed for existing users via the
"In-Home function" menu.
Display indicator
DCA 650-02
S. SIEDLE & SÖHNE
Sprache/Language
ändern/change
Language
English
Language
English
Sprache/Language
ändern/change
Register new
user with
No. of new users
03 new users
No. of new users
02 new users
Registr. running
02 new users
Switch on prog.
mode at BNG/BVNG
V 2.x
<ok>
<ok>
<ok>
<ok>
<ok>
<ok>
<ok>
3