Sewing - DURKOPP ADLER 670 Operating Instructions Manual

Operation
Operating Instructions 670/680 - 00.0 - 01/2017

4.17 Sewing

WARNING
Risk of injury from sharp and moving parts!
Puncture and crushing possible while sewing.
NEVER reach into the area of the sewing feet and
needle during sewing.
Sewing process
Initial position of the machine before sewing starts.
• The main switch is switched on.
• The pedal (1) is in rest position (POS 0).
• The machine is at a standstill.
• The needle is up.
• The sewing feet are down.
• The last sewing process is completed by cutting off the thread.
Fig. 25: Sewing process
①
(1) - Pedal
41