Proper Use - DURKOPP ADLER 670 Operating Instructions Manual

Machine description
Operating Instructions 670/680 - 00.0 - 01/2017
Control panel OP1000
Fig. 3: Control panel OP1000
⑪
⑫
(10) - Power LED
(11) - Thread button group
(12) - Function button
(13) - Programming button group
Information
Refer to the  Instructions for use DAC basic/classic for the
functions of the control.
3.2

Proper use

The machine may only be used with sewing material that satisfies
the requirements of the specific application at hand.
The machine is intended only for use with dry sewing material.
The sewing material must not contain any hard objects.
The needle thicknesses permissible for the machine are listed in
the Technical data ( p. 95) chapter.
The seam must be completed with a thread that satisfies the
requirements of the specific application at hand.
The machine is intended for industrial use.
⑬ ⑭
(14) - Seam program button group
(15) - LED for 2
(16) - Display
⑰
⑯
⑫
⑮
nd
stitch length
15