Maintenance
Operating Instructions 670/680 - 00.0 - 01/2017
6
Maintenance
This chapter describes maintenance work that needs to be carried
out on a regular basis to extend the service life of the machine
and achieve the desired seam quality.
Advanced maintenance work may only be carried out by qualified
specialists, Service Instructions.
Work to be carried out
Removing lint and thread remnants
Check the oil
Servicing the pneumatic system
6.1
Cleaning
WARNING
Risk of injury from flying particles!
Cleaning with compressed air can cause injuries
to the eyes or respiratory organs.
NEVER blow particles towards other persons.
CAUTION
Risk of injury from sharp and moving parts!
Puncture and crushing possible while cleaning
the machine.
Only clean the machine when it is switched off.
Operating hours
8
40
160
500
55