Lubricating - DURKOPP ADLER 670 Operating Instructions Manual

Maintenance
Operating Instructions 670/680 - 00.0 - 01/2017
6.2

Lubricating

WARNING
Risk of injury from contact with oil!
Contact with oil can cause irritation, rashes,
allergies or skin injuries.
ALWAYS avoid long-term contact with oil.
ALWAYS thoroughly wash the affected areas if
contact with oil occurs.
CAUTION
Risk of environmental damage from old oil!
Incorrect handling of old oil can result in severe
environmental damage.
ALWAYS observe the legally prescribed
regulations for handling and disposal of mineral oil.
Take care to ensure that oil is NEVER spilled.
For lubricating the machine, use only lubricating oil DA 10 or oil
of equivalent quality with the following specifications:
• Viscosity at 40° C: 10 mm
• Flash point: 150° C
DA 10 can be obtained from DÜRKOPP ADLER AG sales offices
using the part number given below:
Container Part number
250 ml 9047 000011
1 l 9047 000012
2 l 9047 000013
5 l 9047 000014
2
/s
57