DURKOPP ADLER 670 Operating Instructions Manual page 21

Operation
Operating Instructions 670/680 - 00.0 - 01/2017
To insert a new needle:
1. Turn the handwheel until the needle bar (1) reaches the upper
end position.
2. Loosen the screw (3).
3. Pull the needle downwards out of the needle bar (1).
4. Insert the new needle into the needle bar (1) until it reaches
the end stop.
Important
Fig. 6: Changing the needle (2)
(2) - Groove
The groove (2) must face toward the hook!
5. Tighten the screw (3).
670
②
680
19