DURKOPP ADLER 670 Operating Instructions Manual page 88

86
Code Possible cause
5160 Stitch loosening device
3215 Bobbin stitch counter
(info value 0 reached)
3216 Remaining thread monitor
left
3217 Remaining thread monitor
right
3218 Remaining thread monitor
left and right
3223 Skip stitch detected
3224 Bobbin failed to rotate
6360 No valid data on external
EEprom (internal data
structures are not
compatible with the external
data storage device)
6361 No external EEprom
connected
6362 No valid data on internal
EEprom (internal data
structures are not
compatible with the external
data storage device)
6363 No valid data on internal
and external EEprom
(software version is not
compatible with the internal
data storage device,
emergency operating
features only)
Remedial action
• Stitch loosening cannot be
performed
• Change bobbin, set
counter value
• Change the left bobbin
• Change the right bobbin
• Change left and right
bobbin
-
-
• Perform software update
• Connect machine ID
• Check machine ID
connection
• Switch off the control, wait
until the LEDs are off and
then switch on the machine
again
• Perform software update
• Check machine ID
connection
• Switch off the control, wait
until the LEDs are off and
then switch on the machine
again
• Perform software update
Operating Instructions 670/680 - 00.0 - 01/2017
Troubleshooting