DURKOPP ADLER 670 Operating Instructions Manual page 94

92
Code Possible cause
6354 External EEprom
communication error
8401 Watchdog
8402 - 8405 Internal error
8406 Checksum error
8501 Software protection
Remedial action
• Switch off the control, wait
until the LEDs are off,
check connection for
machine ID, switch on
control again
• Perform software update
• Perform a machine ID reset
• Replace the control
• Perform software update
• Perform a machine ID reset
• Replace the control
• Perform software update
• Replace the control
• The DA tool must always
be used for software
updates
Operating Instructions 670/680 - 00.0 - 01/2017
Troubleshooting