Selecting The Mode Of The Stitch Loosening Device - DURKOPP ADLER 670 Operating Instructions Manual

50
5.1.2 Selecting the mode of the stitch loosening
device
To select the mode of the stitch loosening device:
1. Press the
2. Enter the parameters for the mode of the stitch loosening
device: t 25 00.
• Use A+ to set the value to t.
• Use B+ to set the value to 25.
• Use D+ to set the value to 00.
3. Press the
4. Enter the value for the desired mode:
• Use D+ to enter the value 0 = only stitch loosening active
• Use D+ to enter the value 1 = activation of stitch loosening
nd
plus 2 stitch length
• Use D+ to enter the value 2 = activation of stitch loosening
nd
plus 2 stitch length and quick stroke adjustment
• Use D+ to enter the value 3 = activation of stitch loosening
nd
plus 2 stitch length, quick stroke adjustment and
nd
2 thread tension
5. To save the settings, press the
6. To switch to sewing mode, press the
button.
button.
Operating Instructions 670/680 - 00.0 - 01/2017
Programming
button.
button
.