DURKOPP ADLER 670 Operating Instructions Manual page 60

58
Checking the oil level
The machine is equipped with a central oil-wick lubrication system.
The bearings are supplied from the oil reservoir.
Fig. 30: Checking the oil level
(1) - Oil filler opening
(2) - MAX marking
Proper setting
The oil level must not raise above the MAX marking (2) or drop
below the MIN marking (3).
If the oil level is too low, the inspection glass of the oil reservoir
lights up red.
To top off the oil:
1. Fill oil through the oil filler opening (1) up to the MAX
marking (2).
①
②
③
(3) - MIN marking
Operating Instructions 670/680 - 00.0 - 01/2017
Maintenance