Setting The Height Stop For The Stitch Loosening Device - DURKOPP ADLER 670 Operating Instructions Manual

40
4.16 Setting the height stop for the stitch
loosening device
The stitch loosening device and the gear unit must not rest on the
sewing material during sewing to ensure unhindered transport.
The height stop prevents the stitch loosening device from lowering
onto the sewing material under its own weight.
Fig. 24: Setting the height stop for the stitch loosening device
①
②
(1) - Threaded pin for
height stop
To set the height stop for the stitch loosening device:
1. Screw in or unscrew the threaded pin (1).
• To set the scanner (2) and stitch loosening finger (3)
lower:
Unscrew the threaded pin (1)
• To set the scanner (2) and stitch loosening finger (3)
higher:
Screw in the threaded pin (1)
(2) - Scanner for height stop
(3) - Stitch loosening finger
Operating Instructions 670/680 - 00.0 - 01/2017
Operation
③