Table of Contents
Advertisement
26
6.
Clamp the hook thread behind the thread-pulling knife (6) and
tear it off.
7.
Fit the bobbin onto the winder (5).
The hook thread does not have to be wound on by hand.
8.
Press the winder lever (4) into the bobbin.
9.
Sew.
The hook thread is wound onto the bobbin.
The winder lever (4) stops winding as soon as the bobbin is
full. The winder always stops such that the thread-pulling
knife (6) is at the proper position.
10. Pull off the full bobbin.
11. Clamp the hook thread behind the thread-pulling knife (6) and
tear it off.
Operating Instructions 827/827-M - 01.0 - 02/2019
Operation
Advertisement
Table of Contents
