Setting The Electropneumatic Switching Of The Carrier Roller - DURKOPP ADLER 827-M Operating Manual

48
5.1 Setting the electropneumatic switching of
the carrier roller
To set the electropneumatic switching of the carrier roller:
1. Press the
2. Enter the parameters for the automatic stitch loosening
device: t 14 00.
• Use A+ to set the value to t.
• Use B+ to set the value to 14.
• Use D+ to set the value to 00.
3. Press the
4. Enter the desired mode:
• Use D+ to enter the value 0: do not raise
• Use D+ to enter the value 1: raise on sewing foot lift
• Use D+ to enter the value 2: raise on bartack
• Use D+ to enter the value 3: raise on bartack and sewing
foot lift
5. To save the settings, press the
6. To switch to sewing mode, press the
For additional parameter settings, refer to  Parameter list.
button.
button.
Operating Instructions 827/827-M - 01.0 - 02/2019
Programming
button.
button.