Setup
Operating Instructions 827/827-M - 01.0 - 02/2019
Fig. 32: Setting the working height
(1) - Screws
The working height can be adjusted between 750 mm and
900 mm (measured to the upper edge of the tabletop).
To set the working height:
1.
Loosen the screws (1).
2.
Set the tabletop to the desired working height.
To avoid jamming, make sure to slide the tabletop in or out
evenly at both sides.
3.
Tighten the screws (1).
4.
Set the length of the pedal rod.
Set the height of the pedal rod so that the slope of the released
pedal is approx. 10°.
①
71