Setting The Stitch Count Before Carrier Roller Is Lowered - DURKOPP ADLER 827-M Operating Manual

Programming
Operating Instructions 827/827-M - 01.0 - 02/2019
5.2 Setting the stitch count before carrier roller
is lowered
To set the stitch count before the carrier roller is lowered:
1. Press the
2. Enter the parameters for the number of stitches before the
carrier roller is lowered: t 14 03.
3. Use the buttons A+, B+, C+ and D+ to enter the desired
number of stitches.
4. To save the settings, press the
5. To switch to sewing mode, press the
For additional parameter settings, refer to  Parameter list.
button.
button.
button.
49