66
7.3
Assembling the stand
Fig. 29: Assembling the stand
①
(1) - Oil can
(2) - Pedal
To assemble the stand:
1.
Assemble the pedal (2) to the cross strut (3).
2.
Assemble the cross strut (3) to the stand.
3.
After the machine has been fully assembled, adjust the pedal
( p. 68)
4.
Tighten the oil can holder (1).
5.
Turn the adjusting screw (4) to ensure that the stand is
positioned securely.
All 4 feet of the stand must be in contact with the floor.
(3) - Cross strut
(4) - Adjusting screw
Operating Instructions 827/827-M - 01.0 - 02/2019
Setup
②
③
④