Cleaning The Machine Head - DURKOPP ADLER 827-M Operating Manual

54
6.1.1

Cleaning the machine head

Fig. 22: Cleaning the machine head
①
②
(1) - Area around the needle
(2) - Hook
To clean the machine head:
1. Remove any lint and thread remnants using a compressed
air gun or a brush.
Points that need to be cleaned particularly thoroughly:
• Cutter on the winder for the hook thread (4)
• Area under the throat plate (3)
• Hook (2)
• Area around the needle (1)
(3) - Area under the throat plate
(4) - Cutter on the winder
Operating Instructions 827/827-M - 01.0 - 02/2019
Maintenance
④
③