DURKOPP ADLER 827-M Operating Manual page 41

Operation
Operating Instructions 827/827-M - 01.0 - 02/2019
Buttons on the machine arm
Button Function
Sewing backwards
When this button is activated, the machine sews in
reverse.
Needle position
When this button is activated, the needle moves to a
specific position. This position is determined via the
parameter settings ( Parameter list).
The machine comes configured so that selecting the
button will bring the needle up.
Start bartack and end bartack
This button cancels the general setting for sewing start
and end bartacks.
 If bartacks are on, pressing the button skips the next
bartack.
 If bartacks are off, pressing the button sews the next
bartack.
For the general setting of start and end bartacks, see
 Instructions for use of the DACclassic control.
Roller top feed
If the button is selected, the roller top feed is activated
( p. 36)
39