Inserting/Changing The Needle - DURKOPP ADLER 827-M Operating Manual

Operation
Operating Instructions 827/827-M - 01.0 - 02/2019
4.3

Inserting/changing the needle

Fig. 4: Inserting/changing the needle
① ② ③
(1) - Groove
(2) - Screw
To insert or change the needle:
1. Loosen the screw (2).
2. Pull the needle straight downwards out of the needle bar (3).
3. Insert the new needle straight into the needle bar (3) until it
reaches the end stop.
Important
The groove (1) for the needle must face the hook.
4. Tighten the screw (2).
②
(3) - Needle bar
21