Chapter 6 Maintenance and Inspection
6.1.1 Daily inspection
For daily inspection, check the following.
Check if each of the LEDs is visible. If not, clean it with a soft cloth. Be
careful not to change the switch settings. Check the LED state from the
<TC-net 100 connector>
Check the following:
• Cable connection is normal.
• The modular connector is locked.
• Cable connection is not loose or has an abnormal appearance.
If any abnormality is found, contact one of Toshiba's service
For safety, avoid touching the interior of the
It may cause an electric shock.
When touching the product for cleaning,
remove the static electricity from your body.
The static electricity accumulated in the human body
may cause failure of the product.
When cleaning the product, do not change the
Do not exert any stress on the cables.
Exerting stress on the cables by touching them may
cause malfunction or accidents.
Stop using immediately when an error occurs.
When an error occurs such as unable to turn on the
power, stop using and contact one of Toshiba's