Toshiba TC-net 100 Instruction Manual page 10

Introduction
This manual describes the functions, methods of installation and setting, and
maintenance and inspection of the TC-net 100 (TN8) module ("TN8 module" hereafter)
for connecting the information/control network TC-net 100 to the Unified Controller nv
series.
To use this device correctly, read "Safety precautions" first.
The manuals related to the TN8 module are as follows.
• Unified Controller nv series Main Unit Operation Manual
Describes the main unit hardware of the nv series controller.
• Unified Controller nv series Type 1 Function Manual
Describes the functions and basic use of the nv series Type 1.
• Unified Controller nv series Type 2 Function Manual
Describes the functions and basic use of the nv series Type 2.
• Unified Controller nv series/Integrated Controller V series Command Manual
Describes the detailed specifications of the instruction words of the program
languages (LD, FBD, and SFC) supported by the nv series and Integrated Controller
V series.
• Unified Controller nv series/Integrated Controller V series nV-Tool (Basic)
Operation Manual
Describes how to create, debug, print, and save programs using nV-Tool.
• Unified Controller nv series TC-net 100 Module Manual
(This document)
Describes the TC-net 100 (TN8) module, which is common to Type 1 and Type 2
of the nv series.
After reading the manual, place it in a location that can be accessed easily when
necessary.
viii
6F8C1360
(6F8C1220)
(6F8C1221)
(6F8C1362)
(6F8C1226)
(6F8C1290)
(6F8C1360)