Chapter 7 Application Interface
7.4
Restriction on Station Redundant Configuration
If a station redundant configuration is used with the TN8 module, there
are the following restrictions.
Restrictions on the RAS information block
If a station redundant configuration is used with the TN8 module, do not
register any RAS information block because RAS information generated
by the TN8 module cannot be used.
Therefore, send the information necessary for the application by using a
scan block that is not a RAS information block.
For details on setting the RAS information block, refer to "3.4 Setting the
RAS information block in scan transmission."
70
6F8C1360
Need help?
Do you have a question about the TC-net 100 and is the answer not in the manual?