Setting The Foot Stroke; Setting The Foot Stroke Using The Hand Lever - DURKOPP ADLER 969 Service Instructions Manual

Setting the sewing feet

11.2 Setting the foot stroke

11.2.1 Setting the foot stroke using the hand lever

The hand lever allows the feet to be raised to the heights of 14 mm and
20 mm.
Proper setting
The presser foot rests on the throat plate.
The hand lever is in the inactive position.
 There is a guaranteed clearance of 0.3 - 0.5 mm between the stroke
Cover
• Head cover ( p. 16)
Fig. 50: Setting the foot stroke using the hand lever
①
②
(1) - Hand lever
(2) - Screw
(3) - Hexagonal wrench
To set the foot stroke using the hand lever:
1. Move the handwheel into the 0° position.
 The presser foot rests on the throat plate.
2. Loosen the screw (2) and leave the hexagonal wrench (3) inserted.
3. Turn the stroke lever (4) so that there is a clearance of 0.3 - 0.5 mm
4. Tighten the screw (2).
Service Instructions 969 - 06.0 - 03/2019
lever and the drive dog.
between the stroke lever (4) and the drive dog (5).
③ ④
(4) - Stroke lever
(5) - Drive dog
⑤
67