Working basis
Fig. 11: Locking the machine in place
(1) - Slot
(2) - Locking peg
Locking the machine in place
To lock the machine in place:
1. Turn the handwheel until the appropriate slot (1) is in front of the locking
2. Insert the locking peg (2) with the appropriate end into the slot (1).
Removing the lock
To remove the lock:
1. Pull the locking peg (2) out of the slot (1).
Service Instructions 969 - 06.0 - 03/2019
opening (3):
• Smaller slot at handwheel position 180°
• Larger slot at handwheel position 206°
①
②
③
(3) - Locking opening
23