Setting The Drive Dog Of The Presser Foot Bar - DURKOPP ADLER 969 Service Instructions Manual

Setting the sewing feet

11.1.2 Setting the drive dog of the presser foot bar

Proper setting
The stitch length is set to 0, and sewing foot and presser foot are at the
same height.
 The drive dog is assembled to the presser foot bar in such a position
Cover
• left and right arm cover ( p. 15)
• Head cover ( p. 16)
Fig. 47: Setting the drive dog of the presser foot bar
(1) - Pin
(2) - Screw
(3) - Screws
(4) - Shaft
(5) - Gully
(6) - Assembly
(7) - Plate
(8) - Presser foot
Service Instructions 969 - 06.0 - 03/2019
that the needle shaft touches the presser foot bar.
①
②
③
④
⑤
⑥
⑦
(9) - Feeding foot
(10) - Presser foot bar
(11) - Slot
(12) - Sliding block
(13) - Lever
(14) - Drive dog screw
(15) - Drive dog
⑮
⑭
⑬
⑫
⑪
⑩
⑨
⑧
63