Table of Contents
Advertisement
5
Proper setting
The machine is locked in place at position 2 by the locking peg ( p. 22).
The handwheel is at the 180° position.
Cover
• Belt cover ( p. 17)
Fig. 14: Setting the handwheel scale
(1) - Screws
(2) - Handwheel
To set the handwheel scale:
1. Disassemble the V-ribbed belt ( p. 27).
2. Loosen the screws (1).
3. Assemble belt cover and handwheel.
4. Lock the machine in place at position 2 ( p. 22).
5. Move the handwheel into the 180° position.
6. Slide a hexagonal wrench through the slot (3) and tighten the adjusting
7. Remove belt cover and handwheel( p. 17).
8. Tighten the screws (1).
9. Assemble the V-ribbed belt.
10. Assemble belt cover and handwheel.
26
Setting the handwheel scale
CAUTION
Risk of injury from moving parts!
Crushing possible.
Switch off the machine before you set the
handwheel scale.
①
screw.
Setting the handwheel scale
②
(3) - Slot
Service Instructions 969 - 06.0 - 03/2019
③
Advertisement
Table of Contents
