Moving The Feed Dog Sideways - DURKOPP ADLER 969 Service Instructions Manual

8.1.2 Moving the feed dog sideways

Fig. 29: Moving the feed dog sideways
(1) - Pin
(2) - Threaded pin
(3) - Stroke shaft
(4) - Screw
(5) - Adjusting ring
(6) - Threaded pin
To move the feed dog carrier sideways:
1. Loosen the screw (4).
2. Loosen the threaded pin (2).
3. Loosen the threaded pin (6).
4. Pull the pin (1) out slightly.
5. Move the feed dog carrier sideways so that the needle (10) pierces
6. Tighten the screw (4).
Important
When doing this, make sure that the sliding shaft (7) is held firmly in place
by the clamp (8) and the adjusting ring (9).
7. Press the adjusting ring (5) against the casting and tighten the threaded
Important
When doing this, make sure that the stroke shaft (3) is held firmly in place
by the adjusting ring (5) and the pin (1).
8. Push the pin (1) all the way in and tighten the threaded pin (6).
42
② ①
③
④
⑤
⑥
⑦ ⑧
into the center.
pin (2).
⑨ ⑩
(7) - Sliding shaft
(8) - Clamp
(9) - Adjusting ring
(10) - Needle
(11) - Feed dog
Service Instructions 969 - 06.0 - 03/2019
Setting the feed dog
⑪