Table of Contents
Advertisement
6. To secure the lower stitch length adjusting wheel:
The shaft of the lower stitch length adjusting wheel has been secured.
7. Align the lever (7) such that it is seated in the center on top of the
8. Slide the stitch adjustment lever (5) back to the left.
9. Push the clamping ring (2) up against it.
10. Tighten the screw (4).
Order
Next, set the stitch length adjusting wheels ( p. 35).
16.6 Parts list
A parts list can be ordered from Dürkopp Adler. Or visit our website for
further information at:
www.duerkopp-adler.com
102
• Slide the lever (7) to the right
• Loosen the screws (8)
• Remove the lower stitch length adjusting wheel (3)
• Tighten the screw (9)
Only tighten the screw (10) far enough to secure the shaft, making
sure that the shaft cannot move easily, but the stitch length can still
be set.
• Place the lower stitch length adjusting wheel (3)
• Tighten the screws (8)
bolt (11).
Maintenance
Service Instructions 969 - 06.0 - 03/2019
Advertisement
Table of Contents
