Table of Contents
Advertisement
Programming
15 Programming
All software settings are performed using the OP1000 control panel.
The control panel is composed of a display and buttons.
Using the control panel you can:
• Use groups of buttons to select machine functions
• Read service and error messages
Information
This chapter describes the machine-specific functions of the OP1000
control panel.
Refer to the Instructions for use DAC basic/classic for further
information on the control and the OP1000 control panel.
Fig. 67: Programming
①
②
(1) - Power LED
(2) - Thread button group
(3) - Function button
(4) - Programming button group
Thread button group
Service Instructions 969 - 06.0 - 03/2019
③
④
(5) - Seam program button group
(6) - LED for 2
(7) - Display
Button
Start bartack
Multiple start bartack
⑤
nd
stitch length
Function
• Sets the start bartack
• Sets the multiple start bartack
⑦
⑥
②
85
Advertisement
Table of Contents
